PC CHIPS P63G (V1.0) User's Guide download pdf (Page 12)

Chapter 2: Motherboard Installation

Note 1: To achieve better airflow rates and heat dissipation, we suggest that

you use a high quality fan with 3800 rpm at least. CPU fan and

heatsink installation procedures may vary with the type of CPU fan/

heatsink supplied. The form and size of fan/heatsink may also vary.

Note 2: The fan connector supports the CPU cooling fan of 1.1A~2.2A (26.4W

max.) at +12V.

Note 3: Do Not remove the CPU cap from the socket before installing a CPU.

Note 4: Return Material Authorization (RMA) requests will be accepted only if

the motherboard comes with the cap on the LGA1155 socket.

D. Inserting the Package

· Grasp the package. Ensure to grasp on

the edge of the substrate.

· Make sure pin 1 indicator is on your

bottom-left side.

· Aim at the socket and place the package

carefully into the socket by purely vertical

motion.

E. Closing the Load Plate

· Rotate the load plate onto the package

IHS (Intergraded Heat Spreader).

· Engage the load lever while pressing

down lightly onto the load plate.

· Secure the load lever with the hook under

retention tab.

F. Fasten the cooling fan supporting base

onto the CPU socket on the motherboard.

G. Make sure the CPU fan is plugged to the

CPU fan connector. Please refer to the

CPU cooling fan user’s manual for more

detail installation procedure.

* For reference only

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

No comments

PC CHIPS P63G (V1.0) User's Guide Page 12